Chapter 7: Configuring the Protocols
Perle 833IS User Guide 105
The RIP Configuration screen has the following settings:
RIP Send Type
From the pulldown list select the type of RIPs to be sent over the LAN connection.
The available choices are as follows.
■No RIP Do not send RIPs
■RIPV1 Send version 1 RIPs
■RIPV1 COMPATIBLE Send version 2 RIPs (no multicasts) so as to be
version 1 compatible
■RIPV2 Send version 2 RIPs
RIP Receive Type
From the pulldown list select the type of RIPs to be received over and processed
from the LAN connection. The available choices are as follows.
■No RIP Do not process received RIPs
■RIPV1 Process received version 1 RIPSs
■RIPV1 or RIPV2 Process received version 1 or version 2 RIPs
■RIPV2 Process received version 2 RIPs
Authentication Protocol
If either the Send or Receive type RIP protocol chosen includes RIPv2, you have the
option of choosing the form of authentication protocol to be used when processing
RIPv2 messages. If RIPv2 is not being used at all then the Authentication Protocol
defaults to the only valid selection which is No Authentication.