Chapter 3: Setting Up and Installing
Perle 833IS User Guide 35
Press
Enter the IP subnet mask if required. The IP subnet mask will display none if none
has been configured. When none is displayed, the 833IS will use the default subnet
for the network class (i.e. for a Class C IP address, the IP subnet mask of
255.255.255.0 will be used).
Press
Enter the IP address of the default router if required.
Press
Set the value to match your LAN speed, set to 4 or 16 Mbps for Token Ring or set to
Auto, 10 or 100 Mbps for Ethernet.
Press
If you have an Ethernet interface on the card installed in slot 1, this panel may be
displayed.
Some versions of the 833IS contain a BNC Ethernet interface in addition to the RJ45
interface. For these units, you can use this panel to override the auto port detect
feature of the 833IS. Once set, the 833IS will no longer try to auto detect this port,
even after a restart of the unit. The only way to re-enable the auto detect feature is
via this menu item.
Set the value to the desired port (RJ45, BNC, or Auto Detect).
IP Subnet Mask
255.255.255.000
IP DefaultRouter
000.000.000.000
LAN Speed
Auto Detect
Port
RJ45