Standard Profile
156 Perle 833IS User Guide
Connect Time
This feature will disconnect a dial in user after a preset time limit, regardless of
activity. The default is to allow the user Unlimited connect time. To configure a time
limit, click the Maximum radio button and enter a value for connect time in minutes.
User
Callbacks For a complete discussion on callback, See “User Callback” on page 145.
Enable Roaming Callback
When checked, this option will enable Roaming Callback. If a client asks for
roaming callback during connect, the 833IS will callback with the number supplied
by the client. If a client does not request roaming callback, the session will be
established as if roaming callback was not checked.
If this option is not checked, any roaming callback requests will be rejected at
connect time. Client behavior will be dependent on the client – the client may either
continue the session without callback, or end the session.
Preferred Callback Group
By default, a callback will be made on the next available line that has been enabled
for callback. If you wish to allocate a specific group of channels for callback, select
the group in the drop box. The callback group must have been previously defined.
See “User Callback” on page 145.
If you check Use Exclusively, the callback will occur only if there is a free channel
available in the selected group. If Use Exclusively is not checked, the callback will
use another channel enabled for callback if a channel from the preferred group is not
available.
Client Virtual Connection
Click on this box to enable a client virtual connection.
This feature is used by remote Dial-in clients to save packet charges. The client
drops the physical link to the 833IS when the line is idle but maintains the logical
end-to-end connection (IP/IPX). The client reestablishes the physical link whenever
there is end-to-end data to send. This feature must be supported by the Dial-In
Clients.
This feature is can be used by remote IP or IPX dial in clients to save on connection
charges. With client virtual connect enabled, the client can drop the physical
connection, but the 833IS will keep the session active. The client can then reconnect
and the 833IS will reassign the same session, and client IP address.