Chapter 5: Configuring the Perle 833IS
Perle 833IS User Guide 69
5. The configuration will be uploaded from the server. A TFTP dialog window will
be displayed indicating the upload process of the configuration file.
6. The Configuration File window will display the uploaded configuration file.
Saving The configuration file should be stored on the Manager PC for backup.
To save the configuration file:
1. From the Manager File menu, select Save.
■If the configuration file already exists, the changes will be saved to the
existing file.
■If the file is new, enter a file name for the new configuration, and click OK.
■If you wish to create a copy of a configuration, from the Manager File menu,
select Save As.
Downloading The configuration file needs to be downloaded to the 833IS for the parameters to
take effect.
For system changes to take effect, the 833IS must be reset. If a system reset is done,
all sessions will be terminated.
The only changes which do not require a system reset to take effect are changes to
the user data base. These can be downloaded at any time and will take immediately.
However, changes made to a user who is currently connected to the server will only
take effect the next time the user attempts to connect. For example, if a user is
disabled in the configuration and is currently dialed in, the user will not be
disconnected.
To download a configuration:
1. Connect the Manager to the target 833IS.
2. Open the configuration file that you wish to download
3. From the Configure menu, select Download Configuration.