Loading Firmware
58 Perle 833IS User Guide
Loading Firmw are
Firmware is the basic operating code of a 833IS. A new 833IS must have Firmware
downloaded before it is fully functional. This Firmware is shipped with the
Installation disks.
Download via
Manager If you wish to install a new version of Firmware in your 833IS, you can download
the Firmware from the Manager. You will be prompted to update your Firmware
when you connect to a Server under these conditions:
■If the Manager detects that there is no Firmware.
■If the existing Firmware is at an older revision level.
Note that you can choose not to update the Firmware if the current Firmware meets
your requirements.
The Firmware upgrade must first be installed on the PC on which you are running
the Manager. Follow the instructions included with the Firmware upgrade to install
the Firmware on the PC.
The new Firmware will not take effect until the 833IS is restarted.
To download Firmware:
1. Using the 833IS Manager, connect to the 833IS that you wish to download.
2. If the Manager detects that the Firmware download should be done, a dialog box
will appear:
Click OK to continue, Cancel to cancel the download.
You can also start a download by selecting Download Firmware from the
Configure Menu.