Philips 170X6 - page 53

Troubleshooting
An after-image appears
● If an image remains on the screen for an
extended period of time, it may be
imprinted in the screen and leave an after-
image. This usually disappears after a few
hours
An after-image remains after the
power has been turned off.
● This is characteristic of liquid crystal and is
not caused by a malfunction or
deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
Green, red, blue, dark, and white dots
remains
● The remaining dots are normal
characteristic of the liquid crystal used in
today’s technology.
LightFrameTM doesn't work
● Press the Auto button.
● Activate the LightFrameTM software again.
For further assistance, refer to the Consumer Information Centers list and contact your local
Philips distributor.
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/X6_model/english/170x6/safety/saf_troub.htm (3 of 3)2005-06-27 1:27:27 PM