FAQs (Frequently Asked Questions)

A:Unlike CRT display technology, in which the speed of the electron beam is swept from the top to the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology.

Q:Will the LCD screen be resistant to scratches?

A:A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches. An optional protective cover with greater scratch resistance is also available.

Q:How should I clean the LCD surface?

A:For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.

RETURN TO TOP OF THE PAGE

LightFrameTM DR

Q:Can I use previous LightFrameTM versions 3, 2 or 1 for my new Philips X6-line Monitor?

A:Your monitor comes with the newest LightFrameTM engine. It is not compatible with previous software versions.

Q:Can I use LightFrameTM DR software on my LightFrameTM version 3, 2 or 1 monitor?

A:No, LightFrameTM 1 or 2 or 3 monitors only work with LightFrameTM 1 or 2 or 3 software. It is, however, possible to use the LightFrameTM 2 software on a LightFrameTM 1 monitor.

Q:Can I use LightFrameTM DR for my CRT LightFrameTM monitor?

A:No. LightFrameTM DR is made specifically for digital LCD monitors

file:///D/My%20Documents/dfu/X6_model/english/170x6/safety/saf_faq.htm (3 of 9)2005-06-27 1:27:27 PM

Page 44
Image 44
Philips 170X6 user manual LightFrameTM DR