Philips 24PT6341/37 user manual Using the AV1 in or AV2 in Input Jacks

USING THE AV1 IN OR AV2 IN (INPUT) JACKS

The TV’s audio/video input jacks are for direct picture and sound connections

between the TV and a VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 Input Jack connections are shown on this page, but either one can be connected alone. Follow the easy steps below to connect your accessory device to the AV1 and AV2 in Jacks located on the back of the TV.

1 Connect the VIDEO (yellow) cable to the VIDEO AV1 in (or AV2 in) jack on

the back of the TV.

2 Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 in (or AV2 in) jacks on the rear of

NOTE: Repeatedly pressing the AV button on the remote control will toggle the picture source from the current channel, then the AV1 channel (or CVI channel), then the AV2 channel, then the S-Video (SVHS) channel, then the Front channel (side inputs), then back to the current channel being watched.

		BACK OF TV
24	1
Front			3
	SVHS
	Monitor out	in	AV2 in
	AV2
	VIDEO

CVI L/Mono

AUDIO

S-VIDEO

AV1 R

VIDEO

the TV.

3 Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR (either one or two) or acces- sory device being used.

4 Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR (either one or two) or accessory device being used.

5 Turn the VCR (either one or two) or accessory device and the TV ON.

6 Press the AV button on the remote control to select the AV1 channel for accessory device number one, or the AV2 channel for accessory device number two. AV1 or AV2 will appear in the upper left corner on the TV screen depending on the channel cho- sen.

6

VOL

AV1	2				2
Connection
ANT/CABLE	S-VIDEO	R	L	VIDEO	1
OUT	OUT	AUDIO OUT		OUT

BACK OF VCR

5	7
	VCR ONE (or accessory device)
	(EQUIPPED WITH VIDEO AND
	AUDIO OUTPUT JACKS)

AUDIO IN

(RED/WHITE)

AV2

Connection

4

VIDEO IN (YELLOW)

7 With either of the VCRs (or accessory devices) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.

cCHECK IT OUT

The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is domi- nant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(put) will not be usable.

Note: The Audio/Video cables needed for this connection are not supplied with your TV. Please contact your dealer or Philips at 800-531-0039 for information about purchas- ing the needed cables.

ANT/CABLE S-	R	L	VIDEO
OUT	AUDIO OUT		OUT	3
4

7

5	VCR TWO (or accessory device)
	(EQUIPPED WITH VIDEO AND

AUDIO OUTPUT JACKS)

9