Philips 24PT6341/37 user manual HOW to Automatically Program Channels, Press the Cursor Right but

HOW TO AUTOMATICALLY PROGRAM CHANNELS

Your TV can automatically set itself for local area (or Cable TV) channels. This

makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–)buttons are pressed.

Note: Make sure the antenna or cable signal connection has been completed before AUTO PROGRAM is activated.

1

2

3

4

5

6

Press the MENU button on the remote to show the on-screen menu.

Press the CURSOR UP ▲ or DOWN

▼buttons to scroll through the on-

screen menu until the word INSTALL is highlighted.

Press the CURSOR RIGHT © but-

ton to display the INSTALL menu features.

Press CURSOR UP ▲ or DOWN ▼

buttons to scroll the Install features until the words AUTO PROGRAM are highlighted.

Press the CURSOR RIGHT © but- ton to start the Auto Program scanning of channels. Auto Programming will store all available channels in the TV’s memory then tune to the lowest avail- able channel when done.

When finished, press the STATUS

/EXIT button to remove the menu from the TV’s screen.

HELPFUL HINT

When CABLE is selected, channels 1-125 are available.

When ANTENNA is selected, channels 2- 69 are available.

When AUTO is selected, the TV will auto- matically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated.

16