HOW TO CLEAR ALL BLOCKED CHANNELS AT THE SAME TIME
After blocking specific channels there may come a time when you want to clear all
the channels so they can be viewed. The fol- lowing steps explain how to CLEAR ALL blocked channels.
1 Press the MENU button on the remote to show the
2 Press the CURSOR UP ▲ or DOWN ▼ button until the word FEATURES is highlighted.
3 Press the CURSOR RIGHT © but- ton to display the FEATURES menu options.
4 Press the CURSOR UP ▲ or DOWN ▼ button until the words AutoLock are highlighted.
5 Press the CURSOR RIGHT © but- ton.
6 Enter the correct access code num- ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
options will be displayed.
Press the CURSOR UP ▲ or DOWN
7 ▼ buttons until the words CLEAR ALL are highlighted.
8 Press the CURSOR RIGHT © but- ton to clear all blocked channels. The Clear All option will read, “Cleared.”
9 When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen.
HELPFUL HINT
If you tune to a blocked channel and enter your Access Code to view the channel, ALL blocked channels will be viewable until the TV is powered OFF and then turned back ON. When the TV is powered back ON, the previously blocked channels will be blocked again.
CLEAR ALL will not work with the Movie and TV Ratings. These options must be reset individually.
NOTE: The 0,7,1,1 access code shown on this page is the default code or a way to reset the code when the current access code is not known.
The Clear All option when activated will unblock ALL blocked channels. It will not affect programming blocked by the Movie or TV Rating options.
Or, enter your Access Code to view a tuned channel that is blocked with Block Channel.
24
