Philips 24PT6341/37 user manual Using the S-VIDEO Input Jacks

USING THE S-VIDEO INPUT JACKS

The S(uper)-Video connection on the rear of the TV can provide you with better pic-

ture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections.

NOTE: Repeatedly pressing the AV button on the remote control will toggle the picture source from the current channel, then the AV1 channel (or CVI channel), then the AV2 channel, then the S-Video (SVHS) channel, then the Front channel (side inputs), then back to the current channel being watched.

NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page.

1 Connect one end of the S-VIDEO CABLE to the S-VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R(left and right) jacks on the rear of the TV.

2 Connect other end of the S-VIDEO CABLE to the S-VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR.

3 Turn the VCR and the TV ON.

4 Press the AV button on the remote to scroll the channels until SVHS appears in the upper left corner of the TV screen.

5 With either the VCRs (or accessory devices) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.

HELPFUL HINT

Note: The S-Video and Audio cables needed for this connection are not supplied with your TV. Please contact your dealer or Philips at 800-531-0039 for information about purchasing the needed cables.

AV2

CVI

AV1

24

Front

SVHS

4

VOL

Monitor 2		AV2 in	1
VIDEO
L/Mono	Y
AUDIO	Pb
			S-VIDEO
R
	COMPONENT	INPUT

AUDIO CABLE (RED/WHITE)

S-VIDEO

CABLE

	L	R	VIDEO	S-VIDEO
2	AUDIO OUT		OUT	OUT	2
				BACK OF VCR

3	VCR	5
	(EQUIPPED WITH
	S-VIDEO JACKS)

10