Philips 288P6LJEB Swap a and B source in PbP mode, Off Stop MultiView function, Top-Right

2. Setting up the monitor

PiP / PbP Input :There are four different video input to choose as the sub display source: [DVI], [HDMI], and [DisplayPort].

Please refer below table for compatibility of main/sub input source.

		SUB SOURCE
		POSSIBILITY (xl)
	Inputs	VGA DP	DVI HDMI
MAIN	VGA
	DP
SOURCE
	DVI
(xl)
	HDMI

PiP Size : When PiP is activated, there are three sub-window sizes to choose: [Small], [Middle], [Large].

SmallB

Middle

Large

A(main)

PiP Position : When PiP is activated, there are two sub-window positions to choose.

Swap: The main picture source and the sub picture source swapped on the display.

Swap A and B source in [PiP] mode:

	B		A
A(main)		B(main)

Swap A and B source in [PbP] mode:

B A(main) A B(main)

Off: Stop MultiView function.

A(main)

Note

Top-Right

B

A(main)

Bottom-Right

A(main)

B

When you do the SWAP function, the video and its audio source will swap at the same time. (Refer to page 7 “Independent audio playback, regardless of video input”

DisplayPort supports resolution to only 3840 X 2160 @ 30 Hz when in PBP mode or when it is the sub source in PIP mode; it supports resolution to 3840 X 2160 @ 60 Hz when it is the main source in PIP mode.

11