Philips 28PW6516/01 manual Surround modes, Description of the different surround modes, Stereo

Surround modes

This menu allows you to select the different surround modes.

&Press H, select SOUND (J) and press L. The SOUND menu appears.

éSelect SURROUND MODE and press L.The menu appears :

	SOUND	3D SURROUND
• PICTURE	• LEVEL
• SOUND	• EQUALIZER	HALL SURROUND
• FEATURES
• INSTALL	• SURROUND MODE	DOLBY PRO LOGIC
	• DELTA VOLUME	STEREO
	• STORE	DOLBY 3 STEREO
	• AVL
	• CORDLESS
	• DELAY

“Use the IJkeys to select the relevant surround mode : STEREO, DOLBY 3 STEREO, 3D SURROUND, HALL SURROUND and DOLBY PROLOGIC. For each setting, the active loudspeakers are displayed on screen. Remark : the DOLBY PRO LOGIC and HALL SURROUND modes are only availables if surround loudspeakers are connected to the TV set..

‘To exit from the menus, press R. This TV set is also equipped with automatic switching which will select the correct surround mode, provided the specific signals are transmitted

with the programmes.This automatic format can also be modified manually with the )key.

Description of the different surround modes

Stereo

Dolby

3 Stereo

You have a direct access to the surround modes with the ) key

Stereo

The sound is reproduced on the left and right loudspeakers of the TV set.

Dolby 3 Stereo (with stereo source)

The sound is distributed over the left, right and centre loudspeakers. This mode is not recommended for mono transmissions (only the centre channel will be used).

3D Surround (optimal with Dolby Surround source)

This mode enables you to experience the effect of Dolby Pro Logic without the need of having rear speakers connected or activated.The sound is reproduced on the left, right and centre loudspeakers giving the impression of a rear surround effect.

3D Surround

Hall

Surround

Dolby

Pro Logic

Hall Surround (with mono or stereo source)

The sound is reproduced on the left, right and rear loudspeakers, creating a "Hall Surround" ambient effect.This mode is recommended for broadcasts that are not encoded in Dolby Surround, but where you wish to have a rear surround effect.

This mode is only available when surround loudspeakers are connected to the TV set.

Dolby Pro Logic * (with Dolby Surround sound source)

The left, right, centre and rear speakers reproduce the Dolby Pro Logic sound.This mode is used when a film or programme has been recorded or encoded in Dolby Surround sound.These films or programmes are always indicated by the symbol : £ DOLBY SURROUND.

The DOLBY PRO LOGIC mode is only available when surround loudspeakers are connected to the TV set.This mode is not recommended for mono transmissions (only the centre channel will be used).

”Dolby” and the double-D symbol £are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

9