Philips 46PFL5705DV/F7, 40PFL5705DV, 55PFL5705DV Connecting the antenna or cable, Ant, Hdmi

Connecting the antenna or cable

Cable

OUT

IN

RF CABLE

If you connect to an antenna

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV.This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.

The TV produces stereo sound only if a stereo signal is broadcast.

If you connect to a cable

When your TV is connected to the cable socket, you might receive free digital and high definition programs (depending on your cable provider). The channel number for digital and high definition channels includes a dot “•”. For example, 11.1, 46.30, 108.201. Contact your cable provider for more information.

If you connect to a DBS (Direct Broadcast Satellite)

There are two main DBS systems : DirecTV and DishNetwork.These systems require a separate, proprietary set-top box to decode signals and send them to the TV.The set-top box contains a digital TV tuner for receiving off-air digital broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

If you connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections :

•ANT

•A/V (Composite Video and Audio)

•YPbPr (Component Video Input)

•HDMI

For information about how to connect a set-top box, see the Quick Start Guide provided.

If you connect a set-top box through RF IN / OUT
If the TV is connected to a cable box or satellite set-top box via a	glish
coaxial connection, set the TV to channel 3 or 4, or to the channel
specified by the service provider.	En

RF CABLE

IN OUT

Set-top box

IN

If you connect a set-top box through HDMI

If the TV is connected to a cable box or satellite set-top box via HDMI, make sure you select the correct HDMI source by using SOURCE on this unit's remote control.

	HDMI
IN	RF CABLE

OUT

Set-top box

IN

If you connect a set-top box through component video input

If the TV is connected to a cable box or satellite set-top box via component video input, make sure you select the correct component video source by using SOURCE on this unit's remote control.

RF CABLE
Set-top box
IN
OUT
IN
OUT
YPbPr
IN
AUDIO L/R
EN	9