Philips AZ2536/01 user manual Programming Tracks, Reviewing the program, Erasing a program

CD/VCD/MP3-CD

English

PROGRAMMING TRACKS

Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order.

1.In stop mode, press PROG to enter program setting.

™PROG will start flashing and " P01" will be displayed.

™On TV screen, "PROG" program list (5 lines per page) will be displayed.

2.Press ∞ / § (or use digits 0 - 9 or press ¡, ™ on the remote control) to select the desired track.

• MP3-CD mode only:

First press ALBUM/PRESET -, + once or more (or press digits 0 - 9 or 3/ 4 on the remote control) to find your album, press PROG to store the selected album, and then press

∞ / § (or use digits 0 - 9 or press ¡, ™ on the remote control) to select the desired track.

3.Press PROG to confirm the track number to be stored.

™Display shows " P02", indicating the next program location available.

4.Repeat steps 1-3to select and store all desired tracks.

™ Display: if you try to program more than 20 tracks.

5.Press 2; to play the programmed tracks.

•If you select REPEAT/REPEAT ALL during program playback, the current track or all programmed tracks will be played repeatedly.

™ REPEAT/REPEAT ALL icon and PROG will appear on the display.

Reviewing the program

In the stop position, press PROG repeatedly to see your stored track numbers.

™The display first shows the number of program location and then, the number of the track stored here.

™For MP3-CD only: The display first shows the number of program location and then, the album number for the track stored here. To see the track number, press PROG again.

Erasing a program

You can erase the contents of the memory by:

•opening the CD door;

•selecting FM, MW or TAPE sound sources;

•pressing 9 twice during playback or once in the stop position. = PROG disappears.

16