Philips BDH5011 Picture-In-Picture PIP / Side-by- Side Picture POP Con’t, PIP Window Position

User Manual BDH5011

Picture-In-Picture (PIP) / Side-by- Side Picture (POP) - Con’t

Notes:

•PIP mode can only be turned on if the display’s input is set to:AV, S-Video, Component 1 and 2. If the displays main input is set to RGB or DVI, the PIP and POP will not function.

•If the displays input is set to Component 1 or Component 2, the PIP will only turn on if the input signal source is compatible with 15KHz signals such as 480i and Y/CB/CR signals.

•When changing input source for sub-pictures to Component 1 and Component 2, only 15KHz compatible signals such as 480i and Y/CB/CR will result in a video picture display.The input source selection will not be available if a signal other than 480i or Y/CB/CR is detected.

•Once PIP is turned off, the next time you return on PIP mode, the position of the sub- window will start at default position.

Accessing PIP and POP Modes Modes using OSD

You can also use the OSD menu to access the same PIP and POP mode functions.To access these modes using OSD:

1.Press the MENU +/- keys on the remote or the front control panel.

2.Use the ADJ +/- keys to switch to ‘PIP/POP’ Menu.

3.Make sure that the ‘Picturel’ OSD menu below is displayed.

4.Use the MENU +/- keys to move up and down to choose the sub-category you wish to change.

5.Use the ADJ +/- keys to actually change the setting.

PIP Window Position

1.Choose between FIXED or VARIABLE windows position.

2.If set to FIXED, the PIP window can be set in any one of the four corners of the screen. Use H-LOCATION and V-LOCATION to set the position of the window.

3.If set to VARIABLE, the PIP window can be variably set to anywhere on the screen using H-LOCATION and V-LOCATION.

30