Installations
English
Analog connections
These connections are required for playback and recording via an amplifier/receiver, equipped with analog in- and outputs.
TURNTABLE
DIGITAL OUTPUT | ANALOG OUTPUT |
L
OPTICALCOAX
R
CD PLAYER
PHONO | CD |
| CDR/TAPE |
|
IN | IN | IN |
| OUT |
| L |
| L |
|
| R |
| R |
|
|
|
|
| AMPLIFIER/ |
|
|
|
| RECEIVER |
| DIGITAL | ANALOG |
| |
OPTICAL |
| L |
| |
|
|
| R | CD PLAYER/ |
IN | OUT IN OUT | IN | OUT | |
RECORDER
1Connect the red plug of the supplied audio cable (cinch) to the red jack ANALOG IN R and the white plug to the white jack ANALOG IN L on the CD player/recorder.
2Connect the other end of the audio cable to the analog outputs of the amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC OUT, etc.).
3Connect the red plug of the supplied audio cable (cinch) to the red jack ANALOG OUT R and the white plug to the white jack ANALOG OUT L on the CD player/recorder.
4Connect the other end of the audio cable to the analog inputs of the amplifier/receiver
5Connect all other components of your system (tape deck, CD player, tuner, turntable, etc.) via their analog outputs to the appropriate analog inputs of the amplifier/receiver (CD IN,TUNER IN, AUX IN, PHONO IN, etc.).
0Recording can be done now with any appliance connected to an analog input of the amplifier/receiver. Press INPUT on the CD player/recorder repeatedly to select the analog input.
➜ ANALOG IN is displayed.
How to connect if the analog output on the amplifier/receiver is already being used (occupied) Most amplifiers/receivers have multiple analog output connections (TAPE,VCR,…), but some amplifiers/receivers have only 1 analog output. In case you have already hooked up a tape deck (DAT recorder or MD recorder) to this output you will have to change the existing connections.
1Disconnect the analog connections from the tape deck to the amplifier/receiver.
2Connect the CD player/recorder (see steps
3Connect the analog outputs of the tape deck to any free analog inputs (AUX, CD) on the amplifier/receiver.You can now playback your tape or record from your tape deck on CD. However, it is no longer possible to record on tape.
Digital connections
Direct digital coaxial connection
This connection is required for direct recording from any digital audio equipment with a digital coaxial output (e.g. CD player or DVD player).
DIGITAL OUTPUT | ANALOG OUTPUT |
L
OPTICALCOAX
R
CD PLAYER
DIGITAL | ANALOG |
|
OPTICAL |
| L |
|
| R |
IN OUT IN OUT | IN OUT | CD PLAYER/ |
|
| RECORDER |
●Use a digital coaxial cable to connect the coaxial output of the external appliance with DIGITAL IN on the
CD player/recorder.
0Recording can be done now via the digital coaxial input. Press INPUT on the CD player/recorder repeatedly to select the digital coaxial input.
➜ DIGITAL IN is displayed.
10
