General information
Technical Data
Subject to modification without notice.
General
Power consumption
Active _______________________________ < 20 W
Standby ______________________________ < 0.6 W
Dimensions, w ⋅ h ⋅ d ____________ 435 ⋅ 88 ⋅ 310 mm
17.1 ⋅ 3.5 ⋅ 12.2 inches Weight _______________________________ 5 kg, 8.8 lb
Audio
Frequency response ____________________
Playback
S/N
S/N __________________________________ 110 dB
Dynamic range __________________________ 98 dB
Total harmonic distortion _________________
Channel separation ______________________ 105 dB
Recording
S/N
S/N digital without SRC ____________ equal to source
Dynamic range __________________________ 90 dB
Total harmonic distortion + noise ___________
Digital/optical input ___________________
Laser (CD recorder)
Type ___________________ Semiconductor laser GaAIAs
Wave length ___________________
Output power ________ 2.5 mW (Read), 35 mW (Write)
Beam divergence ________________________ 60 degree
Environmental information
All redundant packing material has been omitted. We have tried to make the packaging easy to separate into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your unit consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
Supplied accessories
–2 analog audio cables (with red and white plugs)
–Remote control
–2 batteries for the remote control, size AA
–Power cable
Maintenance
Clean the unit with a soft,
slightly dampened,
Do not expose the unit, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).
English
As an ENERGY STAR® partner, Philips has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
The set complies with the
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Disc handling
If the CD player/recorder fails to read discs correctly, use a commonly available cleaning CD to clean the lenses before submitting the unit to repair. Other cleaning methods may destroy the lenses. Always keep the trays closed to avoid dust on the lenses.
The lenses may cloud over when the unit is suddenly moved from cold to warm surroundings. Playing a disc is not possible then. Leave the unit in a warm environment until the moisture evaporates.
To take a disc out of its box easily, press the center spindle while lifting the CD(RW). Always pick up a CD(RW) by the edge and put it back in its box after use.
Never write on a CD or attach a
sticker to it. Write only on the printed side of a CDR or CDRW, and only with a soft
To clean a disc, wipe it in a straight line from the center toward the edge using a soft,
7