![Do not place the damper over the plate of FPC.](/images/new-backgrounds/106965/106965111x1.webp)
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Do not place the damper over the plate of FPC.
Do not place the damper over the plate of heater.
HDD Damper Ass'y
Make sure the product with black sheet on the yellow sponge.
Fold the FPC from the board edge.
Push and bend
HDD Ass'y
HDD Set Insert after removing the Release Paper of the
Remove the Release Paper on the back, close and attach it.
Attach it to HDD closely not to loosen.
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
When attaching HDD Cushion (Yellow) and HDD Cushion (Black), set the bending part of the metal plate up.
HDD Thermal Plate
Do not bend it at a sharp angle to put natural R.
|
| 1 |
1 | 3 | 0 |
| ||
3 |
|
|
1 |
|
|
2 |
|
|
1 |
|
|
13
1 3
HDD Cushion (Black)
Metal Plate
To the level of attaching closely in this range
Longer Direction
Attach the HDD Cushion (Yelllow)
Attach the HDD Cushion (Yelllow)
Attach the HDD Cushion (Black)
Sheet
Attach the HDD Thermal Plate
Prepare the metal plate bend.