Press + or
-to switch between outgoing message 1 or 2.
The current outgoing message number will be shown inside the icon 
.
Press to confirm the selected outgoing message
and then proceed to the next setting.
Note : if you do not wish to change the outgoing message type, press station).
(key on the base
Sequence 2 :To set the number of rings before answering
You can set the answer machine to start playing the outgoing message after a given number of rings (1 - 7 rings or Economy mode $).The economy mode (activated by default) is useful when using the remote access.The answer machine will start playing the outgoing message after 3 rings if there are new messages. If there is no new message, the outgoing message will be played after 5 rings. Hang up after the 4th ring if you want to check if you have any messages at no cost.
After having confirmed the outgoing message type (see above), you may select ring delay.
The ring delay icon 
will flash and all other icons except power 
will be cleared.
Press + or
- to select the wanted ring delay : 1, 2, 3, 4, 5, 6, 7 or $ (economy mode).
The currently selected number of ring delays will be shown inside the icon 
.
Press to confirm the selected number of ring delays
and then proceed to the next setting.
Note : if you do not wish to change the number of rings before answering, press the base station).
(key on
Sequence 3 :To activate / deactivate call screening on the base
You can activate or deactivate the call screening on the base loudspeaker, i.e. choose whether you want to hear the message being left by your callers or not. By default the function is activated.
After having confirmed the number of ring delays (see above), you may select call screening ON or OFF.
The loudspeaker icon 
will flash and all other icons except power 
will be cleared.
Press + or
- to select call screening ON or OFF.
If call screening OFF has been selected the loudspeaker icon will be crossed through 
.
Press to confirm the selected call screening setting
and then proceed to the next setting.
Note : if you do not wish to change the call screening setting, press station).
(key on the base
48 | Answer machine DECT 627 |
