APPENDIX B – Hi-Q DEFAULTS
35
ITEM FACTORY DEFAULT VALUE
Alarm Setup
Auxiliary Alarms All Disabled
Auxiliary Alarm Input Polarity All Normally Open
Relay Output Polarity All Normally Open
Relay Output Enable Disabled
Relay Activation Dwell Time 5 seconds
Relay Activation FOLLOWS Mode for Disabled
Contact Closure Alarms
1-Touch Alarm Enabled
Dark Alarms All Disabled
Motion Detector Alarms All Disabled
Pre-alarm Recording Duration 30 Seconds
Post-alarm Recording Duration 1Minute for All Alarm Types
Recording Setup
Video Recording All Continuous
Audio Recording Disabled
Estimated Recording Time Calculated
Image Quality Highest Quality
Time-lapse mode Real Time
Disk Full Behavior Overwrite; (Stop Recording with disk array)
Hard Drive: Data Redundancy For DVRRT4EP Model Only: Striping
Disk (1, 2) Status Determined by System
Total Disk Capacity Calculated
Archive Mode Manual; (set to Stop Recording with disk array)
Motion Detector Setup
Target Size 2 h x 2 v
Motion Zones All Grid Elements Active
Sensitivity 70
Suppression Standard
Motion Detector Direction All (1)
Target Speed 0–40 seconds
Miscellaneous Setups
Profile Name Profile [Profile Number]
Warning Beeper Enabled
Front Panel Password Protection Disabled
Language Selection English
Date/Time On-screen Display Format 24-hour Mode; Not Affected by Restoring Factory Defaults
Activity Log Date/Time Current Date/ Current Time – 5 Minutes
IP Address 10.10.0.0
Subnet Mask 255.255.255.0
Default Router 10.10.0.1
Name of Hi-Q Hi-Qxxxx
Camera Titles Camera n, where n is the camera number <1,2,3,4>
Brightness (Manual Gain) Adjustment on AUTO
Video Inputs (MON A Only)
Sequence Dwell Time - MON A & B 3 Seconds