Hookups (cont’d) 11
Connecting to a TV Only
TV has Component Video In Jacks
Back of TV
3 1
(example only)
Pr/Cr | RIGHT AUDIO IN |
Pb/Cb | LEFT AUDIO IN |
Y |
|
2
Pr | Pb | Y | FL | SL | CENTER |
|
| COAXIAL OPTICAL |
|
| |
|
|
| FR | SR | SUBW. |
12V |
|
|
| MULTICHANNELAUDIOOUT | |
1 Connect the Player’s Pr (red) Pb (blue) and Y (green) jacks to the corresponding Pr/Cr Pb/Cb Y VIDEO IN jacks on the TV. Use component video cable (not supplied). Match the cable col- ors to the jack colors if your cables are
2 Connect the supplied red and white audio cables to the Player’s FR (front right, red) and FL (front left, white) jacks and to the right/left AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3 Connect the supplied power adaptor to the 12V jack on the rear of the Player.
Connect the power plugs of the Player’s adaptor and the TV to a power outlet.
4 Press POWER y or DVD y to turn on the Player.
Turn on the TV and set the TV to the correct Component Video In channel. See your TV owner’s manual for details. Or, change channels at the TV until you see the Player’s blue back- ground screen on the TV.
5 Set TV TYPE accordingly. Details are on page 33.
Set AUDIO OUT to ANALOG. Details are on page 36. Set VIDEO OUT to YCBCR. Details are on page 35.
Helpful Hint
• On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be red, blue, and green.
