Philips DVDQ50 owner manual Receiver Back of TV Example only

14 Hookups (cont’d)

Connecting to a TV and a Stereo Receiver

(Receiver has PCM, Dolby DigitalTM, MPEG2, or Digital Theater System)

Receiver	Back of TV
(example only)	(example only)

3

MAINS

1

COAXIAL DIGITAL	S-Video In
AUDIO IN
	2
1

	SURROUND	CENTER	FRONT
DIGITAL AUDIO OUT			L	1
PCM/MPEG2/AC-3/DTS	L

R R 2

COAXIAL	OPTICAL	SURROUND SUB WF FRONT	AUDIO CVBS	Pr/Cr	Pb/Cb	Y	S-VIDEO
		MULTICHANNEL AUDIO OUT	OUT		VIDEO OUT

Pr/Cr Pb/Cb Y PROGRESSIVE SCAN OUT

Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks (COAXIAL or OPTICAL) to the corresponding DIGITAL AUDIO IN jack on your Stereo. You only need one connection. Use a digital audio cable (not supplied).

2

Connect the supplied S-Video cable to the S-VIDEO OUT jack of the DVD Player and to the TV’s S-VIDEO IN jack. Or, use the CVBS VIDEO OUT jack or Component VIDEO OUT jacks. Details are on pages 10 and 12. You only need one video connection.

3

Connect the flat end of the DVD Player’s power cord (supplied) to the MAINS (AC Power) jack on the back of the DVD Player.

Connect the power cords of the DVD Player, TV, and Stereo Receiver to the power outlet. Turn on the power of the TV and the Stereo Receiver. Press STANDBY-ON on the front of the DVD Player to turn on the DVD Player. The Standby light will disappear.

4

Set the TV to the correct Video In channel. Refer to your TV manual. Or, change TV channels until you see the DVD logo on the TV.

Set your Stereo Receiver to the correct Audio In channel or sound source. Refer to the Stereo’s manual.

5

Set the DVD Player’s digital output. Details are on page 47.

Helpful Hints

•If your Digital Output setting does not match your Stereo’s capabilities, the Stereo may pro- duce a strong, distorted sound or no sound at all.

•You can obtain a six-channel digi- tal surround sound with this con- nection only if your Stereo has a digital multi-channel decoder.

•Your Stereo must support MPEG2, Dolby DigitalTM or Digital Theater System (DTS). Check the Stereo’s manual.

•When playing MP3 files, you may not hear sound if you use the DIGITAL AUDIO OUT jacks. See page 40 for details.

•You may connect a subwoofer (not supplied) to the SUB WF. OUT jack on the DVD Player. Follow the instructions supplied with the subwoofer.