Quick Disc Playback 17
DVD 
AUDIO CD 
VIDEO CD
Playing a Disc
There are many playback features and options available on DVDs and Audio CDs. After familiarizing yourself with the DVD Player and its remote control as described on pages
EJECT STOP PLAY/PAUSE
1
Press the POWER button to turn on the DVD Player. The
Standby light will disappear.
Turn on your TV. Set it to the correct Video In channel. You should see the DVD logo on the TV screen. Details are on page 9.
2
Press EJECT on the front of the DVD Player to open the disc tray. Load your Disc in the tray, with the label facing up. If the Disc is
3
Press EJECT again to close the tray. Playback may begin
automatically.
46
If DVD playback does not start automatically, a Disc menu may appear. If the Title or Chapter selections are numbered, press a Number button to select an item. Or, press the 9 8 ; : buttons to select an item, then press OK. Playback will begin.
If Audio CD playback does not start automatically, press PLAY : to begin Audio CD playback.
1
4
5
Playback will stop at the end of the Title or after the last Track.
6
To stop playback at any time, press STOP C.
To resume playback at the point at which you last stopped play- back on a DVD, press RESUME.
Or, press PLAY :, and while you see the resume symbol on the
TV screen, press PLAY : again. Details are on page 25.
The resume feature applies not only to the current DVD, but also to the last four discs you played. Reload a DVD and press the RESUME button. Or, press PLAY : while you see the resume symbol on the TV screen.
Helpful Hints
•If the Disc is Locked by Access Control, you must enter the four- digit code or authorize the Disc. Details are on pages
•DVDs have a region code. Your Player will not play discs that have a region code different from the region code of your Player. The Player’s region code is 1 (one). Details are on page 7.
•Resume may not be available with some DVDs.
