Philips DVDR3300H, DVDR5330H, DVDR3330H Basic Recorder Connections, Connecting the aerial cables

Step 1: Basic Recorder Connections

Cable Satellite AntennaAerial

A

B

TV

Connecting the aerial cables

These connections enable you to watch and record TV programmes using this recorder. If the aerial signal is connected via a Cable Box or Satellite Receiver, ensure that these devices are turned on in order to watch or record the cable programmes.

If you want to connect to a VCR and/or a separate Cable Box/ Satellite Receiver, see page 19~21 for

other possible connections.

AConnect the existing Aerial/Satellite/ Cable TV signal (or from the Cable Box/ Satellite Receiver, labelled as RF OUT or TO TV) to the ANTENNA socket on the recorder.

BUse the supplied RF coaxial cable to connect the TV socket on the recorder to the aerial input socket (or labelled as VHF/UHF RF IN) on your TV.

Helpful Hint:

– Depending on how you have currently connected your TV channel (directly from an off-air aerial or Cable box or VCR), you’ll have to disconnect some of the cables before you make the above connection.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

16

dvdr3300h_uk_eng_17233d.indd 16 2005-10-19 10:41:21 AM