Setup Menu Options (continued)
Setup settings (These settings will be taken from the first installation)
Auto Install | Press OK on the remote control to start the automatic TV channel |
| search process and replace all previously stored analogue TV channels. |
| This process may take several minutes. |
Manual Search
Manual Channel Search (Page 1)
Channel/Freq. | Channel |
|
|
Entry/Search | 000 |
|
|
Program # | 1 |
|
|
Channel Name |
"OK to Select. NEXT to Page 2" Press SETUP to save and exit
Manual Channel Search (Page 2)
Decoder | Off |
TV System |
|
NICAM | On |
Fine Tuning |
|
Press Previous for page 1 of options
Press SETUP to save and exit
In some cases, not all of the available TV channels may have been found and stored during first installation. In this case, you will need to search for and store the missing or coded TV channels manually. Press OK to access the submenus.
Use keys to select the options in the menu and press OK to confirm. Press to go back to previous menu and press SETUP to save and exit.
{ Channel/Freq. } | – Select manual search based on channel | |
| allocation or frequency (Programme, FREQ, | |
| S. Channel). |
|
| Note: S. Channel (Special channel) refers to | |
| specified hyperband channels. | |
{ Entry/Search } | – Use the numeric keypad | |
| channel number of the TV programme or | |
| start manual frequency search, then press OK | |
| to confirm. |
|
{ Program # } | – Use the numeric keypad | |
| programme number for the channel to store | |
| (e.g., ‘01’) and press OK to confirm. | |
{ Channel Name } | – Use the | keys to select the channel name |
| and press OK to confirm. | |
Note: Move to { Channel Name } and press 
to go to the next page
or move to { Decoder } and press 
back to the previous page.
{ Decoder } | – If the current TV channel is transmitted by | |||
| coded TV signals that can only be viewed | |||
| properly with a decoder which is connected | |||
| to the EXT2 | |||
| activate the connected decoder. |
| ||
| { On } | – | Select this to allocate the connected | |
|
|
| decoder to this TV channel. | |
| { Off } | – | Turn off the decoder feature. | |
{ TV System } | – Set the TV system that produces the least | |||
| distortion of picture and sound. See last page | |||
| “TV System Guide” for more information. | |||
{ NICAM } | – NICAM is a digital sound transmission system. | |||
| It can transmit either one stereo channel or | |||
| two separate mono channels. |
| ||
| { On } | – | Select this to improve the sound | |
|
|
| transmission of the TV channel. | |
| { Off } | – | Select this if the reception is poor | |
|
|
| and the sound is distorted. | |
{ Fine Tuning } | – Select this to | |||
| if the reception is poor. Use | keys to adjust | ||
| the frequency and press OK to confirm. | |||
60
dvdr3300h_uk_eng_17233d.indd 60 |
