Troubleshooting (continued)

Problem

Solution

 

 

No TV signal received from the recorder.

Disc will not play.

The picture is distorted or black and white during playback.

There is picture or sound interference with the TV reception.

Distorted sound coming from a connected hi-fi system or amplifier.

Recordings are not occurring as scheduled. New recordings cannot be made.

The wrong TV channel was decoded (recorded) after you programmed a recording using the VIDEO Plus+® system.

Have your aerial or cable TV signal checked.

Install the TV channel. Read chapter “Setup Menu Options - Setup settings - Auto Install” for details.

Insert the disc with the label facing up.

Wrong region code. The DVD must be coded for ALL regions or Region 2 in order to play on this recorder.

There is no recording on the disc or wrong disc type. Read chapter “Playback from Disc - Playable discs” for details.

Make sure the disc is not scratched or warped. Clean the disc or use a new one.

Check if the disc is defective by trying another disc.

The disc does not match with the TV colour system standard (PAL/NTSC).

The disc is dirty. Clean the disc.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Have your aerial or cable TV signal checked.

Fine-tune your TV channel. Read chapter “Setup Menu Options - Setup Settings - Manual Search” for details.

Do not connect any cables from the recorder to the ‘Phono’ input of your amplifier.

If you are playing a DTS CD, you must use the COAXIAL or OPTICAL-DIGITAL AUDIO OUTPUT socket of this recorder to connect to the Hi-Fi system or amplifier.

The TV channel you want to record is not stored or you selected the wrong programme number. Check the TV channels stored.

You must reset the timer recording after adjusting the clock setting.

You cannot use the recorder to duplicate copyright material (DVDs or videotapes) onto a recordable DVD.

The hard disk might be full. Delete some titles to create space for new recordings.

1)Enter the VIDEO Plus+® programming number of the desired TV channel.

2)Press OK to confirm.

3)Check the channel number in the { Program # } input field. If this does not correspond to the desired TV channel, select this entry field and change the channel number.

4)Press OK to confirm.

64

dvdr3300h_uk_eng_17233d.indd 64

2005-10-19 10:41:32 AM

Page 64
Image 64
Philips DVDR3300H, DVDR5330H, DVDR3330H manual Dvdr3300hukeng17233d.indd 2005-10-19 104132 AM