Sharpness
This will adjust the sharpness of fine details in the picture.
Tint
This will adjust the general colour balance of the picture between cool and warm.
Digital options
Pixel Plus is the most ideal setting.You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Progressive scan.
Dynamic contrast
Sets the level at which the TV automatically enhances the details in dark, middle and light areas of the picture.
DNR
This sets the level at which noise is measured and reduced in the picture.
Colour enhancement
This makes the colours more vivid and improves the resolution of details in bright colours.
Hue
This compensates for the colour variations in NTSC encoded transmissions.
Picture format
This will adjust the size of the picture dependent on the broadcast format and your preferred setting.
Active Control
The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.
&Press the h key on the remote control.
éThe Active Control menu appears.
“Press the cursor up/down to select the Active Control values Off, Minimum, Medium (recommended) or Maximum.
The picture settings are being optimised continuously and automatically which is displayed by bars.The menu items can not be selected.
Note: When having connected a monitor without a light sensor, the values are On and Off.
‘Press the cursor right to select Smart Picture.
(Press the cursor up/down to select one of the predefined picture settings.
§Press the cursor right to select Active Display.
èPress the cursor up/down to select Show bars, one of the Dual screen demos or Off.
When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on.
!Press the h key again to switch off the Active Control menu.
11
