62ENGLISH
OK FILL TANK WITH
DESCALING SOLUTION
4Remove the water tank, and if installed, remove the INTENZA+ water filter. Pour the entire content of the Saeco decalcifier.
Then fill the water tank with fresh water up to the MAX level. Press the “OK” button.
OK |
EMPTY TRAY UNDER |
BREW GROUP |
OKFILL HALF CARAFE |
WITH WATER. INSERT |
IN BREW. POSITION |
OK |
PLACE A CONTAINER |
UNDER HOT WATER & |
CARAFE DISP SPOUT |
STEP 1/2 DESCALING |
PAUSE |
OK | RINSE TANK & |
| FILL WITH WATER |
5Empty the (internal) / (external) drip tray. Press the “OK” button.
6Fill half the milk carafe with fresh water. Insert the carafe and open the milk dispenser by turning it clockwise. Press the “OK” button.
7Place a large container (1,5 lt) under the hot water/steam wand and milk dispenser spout of the carafe. Press the “OK” button.
8The machine will start dispensing the descaling solution at intervals. The bar on the display shows the cycle progress.
Note:
To empty the container during the process, the descaling cycle may be paused by pressing the “ESC” button. To resume the cycle, press the “OK” button.
9The message indicates the end of the first step. The water tank needs to be rinsed. Fill the water tank with fresh water up to the MAX level. Press the “OK” button.
