Philips HTS4600/12 manual Video setup, CD Upsampling

[ HDMI Audio ]

When you connect this unit and TV with HDMI cable, select the audio output setting for this connection.

•[ All ] – the sound is output through both your TV and this speaker system. If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM).

•[ Off ] – disable audio output from your TV. The sound is only output through this speaker system.

[ CD Upsampling ]

Convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

•[ Off ] – turn off CD-upsampling.

•[ 88.2 kHz (X2) ] – convert the sampling rate of the CDs twice as high as the original rate.

Note

•When you press SURROUND to switch to multi- channel mode, it automatically turns off the CD- upsampling feature.

[ Audio Sync ]

Set the default delay time for audio output when you play a video disc.

1.To start, press OK.

2.Select a speaker delay in the menu, then press b B to set the delay time.

3.Press OK to confirm and exit.

Video setup

1 Press OPTIONS.

[ General Setup ] menu is displayed.

2 Press V to select [ Video Setup ], then press B.

3 Select an option, then press OK.

Video Setup

TV Type

TV Display

Progressive

Picture Setting

HDMI Setup

Closed Caption

•See the explanations of the above options in the following pages.

4 Select a setting, then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press OPTIONS.

36EN