Philips MCD510/25 user manual Disc Operations, Playing discs, Using the disc menu

Disc Operations

IMPORTANT!

–This system is designed for regular discs.Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism.

–Do not move the system during playback. Doing so may damage the system.

–DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.

–According to the format requirement of DVD or VCD, some operations may be different or restricted.

–Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction.

–If ø appears on the TV screen when a button is pressed, it means the function is not available on the current disc at the current time.

Playing discs

1Connect the power cords of the DVD Player and TV (and any optional stereo or AV receiver) to a power outlet.

2Turn on the TV power and set to the correct Video In channel. (See "Preparations: Step 4: Setting video preference").

3Press ECO POWER/STANDBY-ON y (y on the remote).

➜ You should see the Philips DVD background screen on the TV.

4Press OPEN •CLOSEç to open the disc door and load in a disc, then press the same button again to close the disc door.

➜ Make sure the label side is facing up. For double-sided discs, load the side you want to play facing down.

5Playback will start automatically. If not press 38 (PLAY/PAUSE 38 on the remote).

➜If a disc menu appears on the TV, see "Using the Disc Menu".

➜If the disc is locked by parental control, you must enter your four-digit password. (See page 30).

Note:

–To ensure good system performance, wait until disc reading is completed before proceeding.

Using the disc menu

For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc.

To select a playback feature or item

●Use 5 / 4 / 1 / ¡ and OK or Numeric Keypad (0-9)on the remote.

➜ Playback will start automatically.

To access or exit the menu

●Press DISC MENU on the remote.

For VCD with Playback Control (PBC) feature (version 2.0 only)

PBC playback allows you to play Video CDs interactively, following the menu on the display.

●In stop mode, press DISC MENU.

➜If PBC was ON, it will switch to OFF and continue playback.

➜If PBC was OFF, it will switch to ON and return to menu screen.

English

23