Philips MCD510/25 user manual English Using S-Video In jack, Using an accessory RF modulator

Connections

English

Using S-Video In jack

IMPORTANT!

–If the picture is distorted, check the Video Output setting. Make sure it is set to ‘S-Video’. (See Setting video preference).

			S-VIDEO
			IN
			AUDIO	TV IN
			IN
			VIDEO IN
				2
			1
			SCART OUT	S-VIDEO OUT
			VIDEO OUT
	DIGITAL
	OUT
R	LINE OUT	L	FM/MW ANTENNA
			FM 75Ω

Using an accessory RF modulator

IMPORTANT!

–If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

RF coaxial cable to TV
2
		Back of RF Modulator
			(example only)
ANT IN	TO TV	VIDEO	AUDIO IN
		IN	R	L
				CH3	CH4
Antenna or
Cable TV signal				1
SCART OUT					S-VIDEO OUT
				VIDEO OUT

1Use the S-Video cable (not supplied) to connect the system’s S-VIDEO OUT jack to the S- Video input jack (or labeled as Y/C or S-VHS) on the TV set.

2To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.

●Use the composite cable (yellow) to connect the system’s CVBS jack to the video input jack on the RF modulator.

●Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

14