Radio Reception
ECO POWER |
|
| RECORD | BAND | CLOCK SET | English |
|
|
| DISPLAY | RDS |
| |
|
| M C D 5 1 0 M I C R O S Y S T E M |
|
|
| |
iR |
|
|
|
|
|
|
ALBUM / PRESET | TUNING |
|
| VOLUME |
| |
TIMER SET |
|
|
|
|
|
|
SOURCE | PROGRAM | DSC | DBB |
|
|
|
|
|
| INCREDIBLE |
|
|
|
|
|
| SURROUND |
|
|
|
Tuning to radio stations
1Select TUNER source.
➜ “FM” or “MW” is displayed briefly.
2Press BAND to select the desired waveband : FM or MW.
3Press and hold TUNING S or ¢
➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found.
4Repeat step 3 if necessary until you find the desired station.
●To tune to a weak station, press TUNING S or ¢
Programming radio stations
You can store up to 40 radio stations in the memory (20 for FM and 20 for MW).
Automatic programming
Press PROGRAM (ANGLE/PROG on the remote) for more than three seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband.
Manual programming
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROGRAM (ANGLE/PROG on the remote) to activate programming.
➜ PX flashes on the display, in which X stands for the programme number.
3Press ALBUM/PRESET 4/3 to allocate a number from 1 to 20 for this station.
4Press PROGRAM (ANGLE/PROG on the remote) again to confirm the setting.
➜ The frequency of the preset station is shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Note:
– During setting, if no button is pressed within 10 seconds, the system will exit manual programming automatically.
31
