Philips MCL1801 user manual Installation, Positioninig

INSTALLATION

Before unpacking the monitor , prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area that is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by two internal fans. For best performance, do not block the cooling vents.

NOTE: before istalling this monitor, please refer to the user’s guides of your computer and video adapter to make sure if these equipments require any change of setting.

Positioninig

WARNING:

WHEN POSITIONING THIS EQUIPMENT, ENSURE THAT THE MAINS PLUG AND SOCKET ARE EASILY ACCESSIBLE

While unpacking the monitor, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. immediately report any shipping damage to the carrier or transportation company, and contact customer service for assistance. keep all packing material in case you need to ship, store or return the monitor.

After unpacking the monitor, make sure the following items are included:

●Monitor

●Mains cord set 1,8-meter (USA version)

●Mains cord set 1,8-meter (EU version)

●Signal cable 1,8-meter (DB15 / DB15)

●This user’s manual

If you ordered the monitor with the resistive touchscreen option, the following items should also be included:

●User’s manual of touchscreen

●Touchscreen cable

PEDESTAL (standard)

With the built-in pedestal you can tilt the monitor for a most comfortable viewing angle as

shown in figure 8a.

5° 15°

fig. 8a

MCL1801 8