Philips MCP9360I/22 manual Installing your Philips Media Center, Connecting a TV / monitor

2 Installing your Philips Media Center

CAUTION! Be sure the Media Center is switched off and disconnected from the mains before making any con- nections.

Notes:

–Unless indicated otherwise, all Media Center inputs and outputs mentioned are located on the rear of the Media Center.

–First make all required video (TV / monitor) connections, then refer to the ‘Connecting audio’ chapter for instructions on how to make audio connections on the Media Center.

Connecting a TV / monitor

Your Media Center is equipped with four TV OUT / MONITOR OUT connectors: S-VIDEO OUT (6), DVI OUT (7), VGA (16) and SCART (21).The DVI (to HDMI) connection is recommended as it offers the highest picture quality. If your TV is equipped with a CVBS connector, you can use the SCART to SVHS / CVBS adapter to make a CVBS connection.

Locate your connector:

Please, first check the type of connector your TV / monitor is equipped with before making any connections.You can locate your connector in the overview below.The sequence (1-6) also indicates the order of picture quality of the various connectors.

TV / monitor connectors

1. DVI-D connector	2. HDMI connector	3. VGA connector
Recommended. Full reso-	Recommended. Full reso-	Full resolution but signal
lution and digital connec-	lution and digital connec-	converts to analog.
tion.	tion.

4. SCART connector	5. S-Video connector	6. CVBS connector
Limited resolution and	Limited resolution and ana-	Only used for recording
analog connection (RGB: 3	log connection (RGB: 1	from a set-top box.
color separation).	channel modulated).

10