Philips MCP9360I/22 manual Connecting a portable media player or HDD or photo camera, External HD

Connecting a portable media player (or HDD or photo camera)

•Connect the Firewire (IEEE1394 / i.LINK) connector of your portable media player (e.g. an MP3 player, Hard Disk Drive or photo camera) to the FIREWIRE (IEEE1394 / i.LINK) connector (11) on the front of the

Media Center. For this use a 4-pin firewire (IEEE1394 / i.LINK) cable (not supplied).

OR:

•Connect the USB connector of your portable media player (e.g. an MP3 player, Hard Disk Drive or photo camera) to the USB 2.0 input (13) on the front of the Media Center. For this use a USB 2.0 cable (not supplied).

Note: Please check to see if additional software is required to support your device. Install the drivers that came with your device before connecting the device to the Media Center. For this, see the user manual of the device.

Portable

Media

Player

Connecting an external drive

•Connect the Firewire (IEEE1394 / i.LINK) connector

of your external drive to the FIREWIRE (IEEE1394 / i.LINK) connector (11) on the rear of the Media Center. For this use a 6-pin firewire (IEEE1394 / i.LINK) cable (not supplied).

OR:

•Connect the USB connector of your external drive to the USB 2.0 connector (13) on the rear of the Media Center. For this use a USB 2.0 cable (not supplied).

Note: Please check to see if additional software is required to support your device. Install the drivers that came with your device before connecting the device to the Media Center. For this, see the user manual of the device.

(HDD, optical drive)

External HD

Input

External HD

28