Copyright Important Information, Regulation | Philips Orion/2

Orion/2 Outdoor

Preface

The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice.

Notice

To work with the High Speed Dome Cameras, any installer or technician must have the following minimum qualifications:

•A basic knowledge of CCTV systems and components

•A basic knowledge of electrical wiring and low-voltage electrical hookups

•Have read this manual completely

Copyright

Under copyright laws, the contents of this user manual may not be copied, photocopied, translated, reproduced or reduced to any electronic medium or machine-readable format, in whole or in part, without prior written permission of the company.

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.

Regulation

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2

Image 3

Philips Orion/2 manual Copyright Important Information, Regulation

Contents

Installation & User Instructions Orion/2 Outdoor Regulation Copyright Important Information Never face the camera towards the sun Handle the camera carefullyDo not disassemble the camera Do not block cooling holes on the bracket Connecting the High Speed Dome Operation and ConfigurationOverview Appendix C Protocol-Pelco Appendix D Philips Allegiant Appendix a Technical Specification Appendix B Ernitec Erna Overview Product Features Package Content Connecting the High Speed Dome Communication Switch Setting Switch Definition Dome Control Protocol Dome ID Setting 2400 22-Pin Connector Definition 11~20 Pin Cable Alarm Pin Definition RS-485 ConnectorFor connection to Ernitec equipment, use Rx+ and Rx OSD Display Format Operation and Configuration 1 26x Model OSD Menu Tree Cruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit Configuration Menu Default Camera26x Model 22/23x Model Auto BacklightFocus 26x Model Manual Aperture Gain AE ModeBright Shutter AGC WBC Mode ATW ID DisplayIndoor Outdoor Setup Menu OFFImage Zoom Speed 23x Model Slow Shutter Last Setup MENU2 26x Model OnlyTitle Display First Alarm Setting Title Setting Alarm Action Alarm PINAlarm Switch Alarm Type Home Setting Select Mode SequenceReturn Time Speed Preset PositionSequence Line Sequence Point Start Point AutopanDwell Time RUN Sequence Autopan Line RUN Autopan CruiseEND Point Direction RUN Cruise IR Function Removable IR CutRecord Start Record END Threshold Alarm Detect 26x Model OnlyDetect Switch Detect Mode WDR Setting 23x Model Only Transparency Privacy SwitchPrivacy WDR Function Size 00~80 ColorSET Mask Center Size 000~127 Mask CLEAR+RESETShade Center 000~256 Year / Month / DAY Time FunctionSchedule Function Time Display Exit OSD Appendix a Technical Specification Appendix B Ernitec Erna Run Preset Tour Iris functionCruise Tour Cable Length Symbol DefinitionControl Dome Camera Using Pelco Keyboard Special Function Cable Definition D Protocol Keyboard to Speed Dome Cable Definition P Protocol Keyboard to Speed Dome Appendix D Philips Allegiant Control Dome Camera Using Allegiant Keyboard 26x Model OSD Menu Notes Autopan 22/23x Models WDR Setting