Handle the camera carefully | Philips Orion/2 guide

Orion/2 Outdoor

Cautions

•Handle the camera carefully

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage.

•Do not disassemble the camera

To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing.

•Do not block cooling holes on the bracket

This camera has a cooling fan inside. Blocking the cooling holes leads to build up of heat the camera and may cause malfunction.

•Do not operate the camera beyond the specified temperature, humidity or power source ratings

Use the camera under conditions where temperature is between -50°C ~ 50°C (-58°F ~ 122°F), and humidity is below 90%.

•Do not use strong or abrasive detergents when cleaning the camera body Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently.

•Never face the camera towards the sun

Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, the camera may be smeared or damaged.

3

Image 4

Philips Orion/2 Handle the camera carefully, Do not disassemble the camera, Do not block cooling holes on the bracket

Contents

Installation & User Instructions Orion/2 Outdoor Copyright Important Information Regulation Handle the camera carefully Do not disassemble the cameraDo not block cooling holes on the bracket Never face the camera towards the sun Operation and Configuration Connecting the High Speed DomeOverview Appendix a Technical Specification Appendix B Ernitec Erna Appendix C Protocol-Pelco Appendix D Philips Allegiant Overview Product Features Connecting the High Speed Dome Package Content Switch Definition Communication Switch Setting Dome ID Setting Dome Control Protocol 22-Pin Connector Definition 2400 Pin Cable 11~20 RS-485 Connector Alarm Pin DefinitionFor connection to Ernitec equipment, use Rx+ and Rx Operation and Configuration OSD Display Format OSD Menu Tree 1 26x Model Cruise 2 22x / 23x Model WDR Setting Schedule Reset Schedule Exit Default Camera Configuration Menu26x Model 22/23x Model Backlight Focus26x Model Auto Aperture Manual AE Mode BrightShutter Gain WBC Mode AGC ID Display IndoorOutdoor ATW OFF Setup MenuImage Zoom Speed Slow Shutter 23x Model Setup MENU2 26x Model Only Title DisplayFirst Last Title Setting Alarm Setting Alarm PIN Alarm SwitchAlarm Type Alarm Action Home Setting Sequence Select ModeReturn Time Preset Position Sequence LineSequence Point Speed Autopan Dwell Time RUN SequenceAutopan Line Start Point Cruise END PointDirection RUN Autopan IR Function Removable IR Cut Record StartRecord END RUN Cruise Alarm Detect 26x Model Only Detect SwitchDetect Mode Threshold WDR Setting 23x Model Only Privacy Switch PrivacyWDR Function Transparency Color SET MaskCenter Size 00~80 Mask CLEAR+RESET ShadeCenter 000~256 Size 000~127 Time Function Schedule FunctionTime Display Year / Month / DAY Exit OSD Appendix a Technical Specification Appendix B Ernitec Erna Iris function Run Preset TourCruise Tour Symbol Definition Control Dome Camera Using Pelco KeyboardSpecial Function Cable Length Cable Definition P Protocol Keyboard to Speed Dome Cable Definition D Protocol Keyboard to Speed Dome Control Dome Camera Using Allegiant Keyboard Appendix D Philips Allegiant OSD Menu Notes 26x Model Autopan 22/23x Models WDR Setting