ENInstall

Set date and time

1.Press mMENU.

2.Scroll :to Clock & Alarm and press mSELECT.

3.Press mSELECT to enter Set Date/Time.

4.Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK.

WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

Now, you are ready to use your phone.

Basic operations of your ID937

Make a call

Enter the phone number (maximum 20 digits) and press r to dial the number.

For details, please refer to "Make a call" on page 16.

Answer or end a call

Press r key to answer a call.

Press e key to end a call.

For details, please refer to "Answer a call" on page 16 and "End a call" on page 17.

Switch the handset on/off

Press and hold ekey for 3 seconds to switch off the handset in stand-by mode.

Short press e key to switch on the handset again.j

Keypad lock/unlock

Press and hold *key for 2 seconds to lock or unlock the keypad in stand-by mode.

Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

Short press p key on the base. The handset starts to ring. Once retrieved, press any key on the handset to end the paging.

Stand-by mode

If the handset is not used for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station.

14

Page 14
Image 14
Philips Telephone Answering Machine user manual Set date and time, Basic operations of your ID937, Stand-by mode