Structure parts with fixed angles, for use with prewired TTX400 light-line. This structure part is delivered with integrated coupling piece and internal through-wiring. Can be used for X-, T- and L configurations
Steel wire, diameter 1.8 mm², length 10 m
Through-wiring connector
A 5-pole connection block for connecting the electrical unit when using the unwired TTX410 profiles. The same connection block is used as an additional block for the pre- wired TTX400 when connecting to emergency lighting or light regulation. The connector is clicked inside the trunking and allows through-
The middle-of-line connection unit enables the mains connection to be made in the middle of a light-line.The unit comprises two 7-pole connection blocks for mains connection.To be used in the middle of a light-line when very long lines are used, to restart mains supply in both directions.The same middle-of-line connection unit is
| TTX400 | | |
| Cable duct, for installing on the | | |
| trunking, in white plastic, with a length | | |
| of 2 or 3 electrical units. Can be closed | systems |
| with blind cover strips.To be used |
| | |
| in combination with the suspension | line- |
| brackets ZTX400 UCD/CCD. Also |
| Light |
| available in length of 49, 54 W. |
| | |
| Internal coupling piece | | |
Electrical connector for attaching waterproof and surface-mounted luminaires to the prewired trunking TTX400.This electrical connector can be clicked on the connection block as mounted standard in the TTX400 light- line (also ZTX400 DC).The electrical connector comprises insert contacts and a strain reliever
The continuous-line connection unit is used at the end of a light-line when a through-connection is needed to pass an interruption of the light-line. It comprises a 7-pole screw connection block.The same continuous-line connector is used for the TTX400 with either the internal 5- or 7-wire flat ribbon cable. Not to be used for
Cable clips for guiding and easy-click fixing of wires in both TTX400 and TTX410 trunking sections
