Philips indoor luminaires8.62 Light-line systems
TTX400
TTX400 Linesense
TTX400 with Lighting Controls
Applying Lighting Controls in industry contributes to efcient and
effective lighting solutions. For TTX400 applications, Philips Lighting
offers various standard trunking system based controls solutions,
included in the Linesense range. These solutions offer an intelligent
light-line, which remains easy-to-install.
With Linesense, TTX400 and lighting controls are combined in one,
creating an intelligent light-line which is still easy to install. It allows
substantial energy savings of up to 75%. Developed for industrial
applications like warehouses,
Linesense consists of a 618 mm section of trunking, which is fully pre-
equipped and wired for addition to the trunking. The control function
is integrated into this extra unit and can easily be clicked between
the light-line and the electrical connection unit. Movement detectors
are connected with standard RJ-12 cables and mounted at the right
location with the use of dedicated brackets. Linesense is equipped as
standard with a telejack splitter to easily connect the detectors to the
light-line.
Fully assembled TTX400 Linesense unit
ZTX400 MDU-D Linesense unit
suitable for movement detection
(dimming or switching off), daylight
linking and manual control; works with
HFR DALI ballasts
The ZTX400 MB-MDU is a Linesense
mounting bracket for clicking
movement detector LRM 8115/00 or
LRM 8117/00 to the trunking section.
The right tilt angle can be adjusted
manually and is to be checked by a walk
test. The same tilt angle can be easily
reproduced on more sensors thanks to
a click graduation on the bracket
Light sensor intended for high-bay
mounting (approx. 7.5 m high).
Intended for use with the Linesense
control (ZTX400 MDU-D). An
installation bracket is included. The
sensor is connected to the control
unit with a modular plug-in (RJ-12)
connector cable
High-bay passive infrared movement
detector (mounting height up to
15 m), equipped with an adjustable
delay timer (up to 35 minutes). Can
be used with all MDU control units. A
dedicated mounting bracket (ZTX400
MB-MDU) is available, into which the
movement detector can be clicked
Accessories
Indoor_2008_Chapter_08_LIS.indb 62 20-05-2008 13:26:40