Miller Electric 280 NT manual Maintenance & Troubleshooting, Routine Maintenance, 100, 200, 500

. A complete Parts List is available at www.MillerWelds.com

SECTION 8 − MAINTENANCE & TROUBLESHOOTING

8-1. Routine Maintenance

.Follow the storage procedure in the engine owner’s manual if the unit will not be used for an extended period.

				! Stop engine before maintaining.
			Recycle engine	. See Engine Manual and Maintenance Label
			fluids.	for important start-up, service, and storage
				information. Service engine more often if
				used in severe conditions.
n = Check	Z = Change	~ = Clean	l = Replace	Reference
* To be done by Factory Authorized Service Agent

Every			Section 5-2
8
Hours
n Fuel Level	n Oil Level	~ Oil, Fuel Spills
Every			Section 8-3,
25			8-4
Hours
n~ Spark Arrestor Screen	~ Air Cleaner Wrapper
Every
50
Hours
~ Weld Terminals
Every			Engine
100			Manual,
Hours			Section 8-4,
			8-5
~ Battery Terminals	~ Cooling System	Z Oil	nl Air Cleaner Element
Every			Engine
200			Manual,
Hours			Section 8-5
l Unreadable Labels	n Spark Plug Gap	Z Oil Filter	l Fuel Filter
Every
500
Hours
nl Weld Cables	n~ Slip Rings*
	nl Brushes*

OM-4430 Page 33