Miller Electric 280 NT manual Changing Engine Oil, Oil Filter, And Fuel Filter, Full

. A complete Parts List is available at www.MillerWelds.com

8-5. Changing Engine Oil, Oil Filter, And Fuel Filter

Full

2

! Stop engine and let cool.

1Oil Drain Valve

2Oil Filter

Change engine oil and filter accord- ing to engine manual.

NOTICE − Close valve and valve cap before adding oil and running engine.

Fill crankcase with new oil to full mark on dipstick (see Section 8-2).

3Fuel Filter

4Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

! Stop engine, tighten connec- tions as necessary, and wipe up fuel.

3

4

1

Tools Needed:

803 983−A / Ref 216 172-D / S-0842

OM-4430 Page 36