Philips TTX400 manual Maxos TL-D IP63 closed reflector units

Maxos

Maxos TL-D IP63 closed reflector units

Maxos IP63 closed reflector units are ready-to-install dedicated luminaires for the Maxos trunking system.They are designed for industrial applications requiring good protection of reflectors against dust, in particular the automotive industry and food industry.The unit can be easily cleaned with a wet cloth.

The housing is made of steel with a white coating, while the cover is made of tempered glass or, optionally, polycarbonate (PC); the inner reflector is made of aluminum.

Maxos IP63 closed reflector units combine the functions of Maxos electrical units, reflectors and covers.They are designed for reliable mounting on Maxos trunking sections in TL-D lengths.A connector block is mounted on top of the units for electrical connection to the trunking. Mechanical connection is realized by means of a safe bracket with knee-lever clasp around the trunking. IP63 classification is valid

for the complete lamp, optical and ballast compartment; however, the classification for the total system including IP20 trunking sections is IP20.

The standard range is 1-lamp and 2-lamp TL-D 58 W with HF or conventional ballast and TL5 80 W with HF ballast, all to be mounted on the TL-D Maxos trunking system, optionally with EL3 emergency lighting.

The units come with inner aluminum reflectors for wide-beam (WB) or asymmetrical-beam (A) light distribution.White louvers (4MX093 1/2 58 L-IP63-unit WH) are available as accessories.

Please note that Maxos is not designed for application in regular humid environments.

	Maxos TL-D
	IP63 Reflector unit
Type	4MX014	Material	Housing: steel, white coated
Lamp	Fluorescent:		Cover: tempered glass (GT) or polycarbonate
	1 x or 2 x MASTER TL-D / G13 / 58 W or 1x		(PC) (optional)
	or 2x TL5 80 W	Accessory	Steel, white inlay louver (4MX093 1/2/58 L-IP63-
			unit WH)
Gear	Electro magnetic (low loss), 230 or 240 V / 50 Hz:
	Inductive, parallel compensated (IC)	Remarks	The electrical connection to the trunking is realized
	Electronic, 220 - 240 V / 50 - 60 Hz:		via a pre-mounted connector block, the mechanical
	High Frequency Performer (HFP)		connection via a bracket with knee-lever clasp
			around the trunking
Reflector	Wide beam (-WB)
	Asymmetric (-A)		IP63 for optical compartment inclusive lamp- and
			ballast compartment only, can be used with regular
Option	Emergency lighting: 3 hours (EL3)
			IP20 flat ribbon trunkings
		Main applications	Industry: automotive and food (cleanable front
			screen)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Maxos 4MX014 IP63 closed reflector unit

Maxos 4MX014 IP63 closed reflector unit with louver

8.28 Light-line systems Philips indoor luminaires