Philips TTX400 - page 55

Philips indoor luminaires8.54 Light-line systems

TTX400

TTX400 trunking sections

This trunking system for TL5 and TL-D lamps comprises prewired

sections (TTX400) and optional unwired sections (TTX410). The

sections can be easily clicked together using the integrated electrical/

mechanical coupling pieces. The trunking is available with a complete

range of interchangeable components to offer outstanding exibility.

All the trunking sections are made of white prelaquered steel. Round

edges reduce the risk of injury. Flat-ribbon cable (5 or 7 wires), an

integrated phase-selection switch and contact blocks with click

connection make electrical and mains connection quick, simple and

safe (if 3 phases are used equalised, the maximum current is 16 A).

The rigidity of the sections and coupling pieces limits the number of

mounting brackets needed (max. 3 meters when using 493 trunking

sections). The electrical unit is simply clicked into the trunking for both

mechanical and electrical connection.

The prewired section TTX400 is equipped standard with a 5- or

7-wire 2.5 or 1.5 mm² at ribbon cable. The 7-wire at ribbon cable

is used especially for the integration of light regulation or emergency

lighting functions. Hence, no extra contact blocks or wiring need to be

installed. TTX400 is available in lengths of 1, 2 and 3 electrical units of

TL5 28/54 W, 35/49/80 W and TL-D 36 W and 58 W. It is also available

in 9 wires (7-wire at-ribbon plus 2 additional low-voltage cables for

dimming) for the integration of light regulation and emergency lighting

functions. The new optimized and recommended solution, instead of

TTX400 9, consists of the standard TTX400 7-wire at-ribbon and the

new electrical units TMX400 C-2R.

TTX400 is also available with a 5-wire 1.5 mm² ribbon cable, in the

same lengths as mentioned before; to be used in combination with

HFP units.

TTX400 TL5

Standard trunkings

Type TTX400 (prewired)

Length 1 x, 2 x or 3 x length of electrical unit 49 (491, 492

or 493), also applicable for 80 and 35 W electrical

unit

1 x, 2 x or 3 x length of electrical unit 54 (541, 542

or 543), also applicable for 28 W electrical unit

Electrical circuit option TTX400 5: 1 x at ribbon cable, 5 wires, 1.5 and

2.5 mm²

5-wire: standard at ribbon cable (5)

TTX400 7: 1 x at ribbon cable, 7 wires, 2.5 mm²

7-wire: standard at ribbon cable (7)

TTX400 9: 9-wires

7-wire standard at ribbon cable + 2 hardcore

cables 1 mm² (9)

7-wire standard at ribbon cable + 2 cables

1 mm² for communication purpose (9T)

Alternative to TTX/TMX400 9 : TTX400 7 +

TMX400 C-2R

Phase selection switch and contact blocks with

click connection are integrated

Connection Connection box ZTX400 CU or ZTX400 CM

Trunking piece TTX400 CU7 (to be completed

with ZTX400 EP-CU)

Universal TTX400 CM-CU for cable entry at the

beginning of light-line or in the middle

Material Steel, prelacquered white

Accessory Suspension/mounting brackets, external coupling

piece, etc, see TTX400 accessory section

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

TTX400 TL-D