About the Liquid Crystal Display (LCD) Screen

Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a problem with the dis- play.

At low temperatures, the LCD screen may be dark for a while after the power is turned ON.

The LCD screen will be difficult to see if it is exposed to direct sunlight.

Keeping the Display in Good Condition

When removing dust from the screen or cleaning the display, first turn the system power OFF, then wipe with a soft dry cloth.

When wiping the screen, take care not to scratch the surface. Do not use harsh or abra- sive chemical cleaners.

Do not use a wet cloth for cleaning. Do not use organic solvents, such as benzine and thinner, either.

About the Small Fluorescent Tube

A small fluorescent tube is used inside the display to illuminate the LCD screen.

*The fluorescent tube is an expendable and has a limited service life.

*The fluorescent tube should last for approximately 10,000 hours, depending on oper- ating conditions. (Using the display at low temperatures reduces the service life of the fluorescent tube.)

*When the fluorescent tube reaches the end of its useful life, the screen will be dark and the image will no longer be projected. If this happens, consult your dealer or the nearest authorized PIONEER service facility.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

24

Page 25
Image 25
Pioneer AVD-W8000 owner manual About the Liquid Crystal Display LCD Screen, Keeping the Display in Good Condition