Pioneer CD-BTB20 Basic operation of hands- free phoning, Making a phone call, Taking a phone call

Section

02 Bluetooth Telephone

#Before disconnecting cellular phone from this unit, make sure to adjust the volume to proper level. If the volume has been muted (zero level) on your cellular phone, the volume level of your

cellular phone remains muted even after the cel- lular phone is disconnected from this unit.

1Touch VOICE to turn the voice recogni- tion function on.

Voice dial icon appears on the information bar.

Voice recognition function is now ready.

# If your cellular phone does not feature voice recognition function, you can not touch VOICE.

2Pronounce the name of your contact.

Basic operation of hands- free phoning

These are the basic operations to use hands- free phoning via Bluetooth wireless technol- ogy. More advanced hands-free phoning op- erations are explained starting on Introduction of advanced hands-free phoning operation on the next page.

Important

Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place and operate.

Making a phone call

Voice recognition

If your cellular phone features voice recogni- tion technology, you can make a call by voice commands.

!Operation varies depending on the type of your cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

!This function can be operated only when the connection is established with HFP (Hands Free Profile).

Taking a phone call

Answering an incoming call

Even when a source other than Telephone is selected or when this unit is turned off, you can still answer incoming calls. If you set this unit to automatically answering incoming calls, refer to Setting the automatic answering on page 20.

1 When a call comes in, touch .

#If the private mode is selected on the cellular phone, hands-free phoning may not be per- formed.

2 To end the call, touch .

The estimated call time appears in the display (this may differ slightly from the actual call time).

#You may hear a noise when you disconnect the phone.

Rejecting an incoming call

You can reject an incoming call. To reject all incoming calls automatically, refer to Setting the automatic rejecting on page 20.

%When a call comes in, touch . The call is rejected.

10 En