Using the AUX source
Upto two auxiliary devices such as VCR or
portabledevices (sold separately) can be con-
nectedto this unit. When connected, auxiliary
devicesare automatically read as AUX sources
andassigned to AUX1 or AUX2. The relation-
shipbetween AUX1 and AUX2 sources is ex-
plainedbelow.

About AUX1 and AUX2

Thereare two methods to connect auxiliary de-
vicesto this unit.

AUX1 source:

Whenconnecting auxiliar y device using aster eo
miniplug cable
%Insertthe stereo mini plug into the
inputjack on this unit.
Formore details, refer to What’s what on page
10.
Thisauxiliary device is autom atically set to
AUX1.

AUX2 source:

Whenconnecting auxiliar y device using an IP-
BUS-RCAInterconnector (sold separately)
%Usean IP-BUS-RCA Interconnector such
asthe CD-RB20/CD-RB10 (sold separetely)
toconnect this unit to auxiliary device fea-
turingRCA output.
Formore details, refer to the IP-BUS-RCA Inter-
connectorowner ’s manual.
Thisauxiliary device is autom atically set to
AUX2.
#Youcan only make this type of connection if
theauxiliary device has RCA outputs.

Selecting AUX as the source

%PressSOURCE to select AUX as the
source.
#Ifthe auxiliary setting is not turned on, AUX
cannotbe selected. For more details, see Switch-
ingthe auxiliary setting on page 29.

Setting the AUX title

Thetitle displayed for the AUX1 or AUX2
sourcecan be changed.
1 Afteryou have selected AUX as the
source,use MULTI-CONTROL and select
FUNCTIONto display TITLE INPUT.
2 Entera title in the same way as the
built-inCD player.
Fordetails concerning operation, refer to En-
teringdisc titles on page 18.
Turningthe clock displayon or off
Youcan turn the clock display on or off.
!Evenwhen the sources are off, the clock
displayappears on the display.
%PressCLOCK to turn the clock display
onor off.
Eachpress of CLOCK turns the clock display
onor off.
#Theclock display disappears temporarily
whenyou perform other operations, but the clock
displayappears again after 25 seconds.
<YRD5266-B/S>32
Other Functions
En
32
Section
05