Black plate (11,1)
<XRD7106-A/N>11
Listening to the radio
1
2
3
4
5
Theseare the basic steps necessary to operate
theradio. More advanced tuner operation is
explainedstarting on the next page.
Important
Ifyou are using this unit in North, Central or
SouthAmerica, reset the AM tuning step (see
Settingthe AM tuning step on page 38).
1Stereo(5) indicator
Showswhen the selected frequency is
beingbroadcast in stereo.
2LOCindicator
Showswhen local seek tuning is on.
3Presetnumber indicator
Showswhich preset has been selected.
4Bandindicator
Showswhich band the radio is tuned to, AM
orFM.
5Frequencyindicator
Showsthe frequency to which the tuner is
tuned.
1 PressSOURCE to select the tuner.
PressSOURCE until you see Tuner displayed.
2 PressBAND to select a band.
PressBAND until the desired band (FM1,
FM2,FM3for FM or AM) is displayed.
3 Toperform manual tuning, briefly press
cord.
Thefrequencies move up or down step by
step.
4 Toperform seek tuning, press and hold
cordfor about one second and release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
#Youcan cancel seek tuning by briefly pressing
cord.
#Ifyou press and hold cor dyou can skip sta-
tions.Seek tuning starts as soon as you release
thebutton.
Tuner
En 11
English
Section
04