Black plate (38,1)
<XRD7106-A/N>38
Note
Ifseek tuning is performed in 50 kHz steps,sta-
tionsmay be tuned in imprecisely. Tune in the sta-
tionswith manual tuning or use seek tuning
again.
Setting the AM tuning step
TheAM tuning step can be switched between
9kHz, the preset step, and 10 kHz. When
usingthe tuner in North, Central or South
America,reset the tuning step from 9 kHz (531
1602 kHz allowable) to 10 kHz (530 1 640
kHzallowable).
1 PressFUNCTION to select AM Step.
PressFUNCTION repeatedly until AM Step
appearsin the display.
2 Presscor dto select the AM tuning
step.
Pressingcor dwill switch the AM tuning
stepbetween 9 kHz and 10 kHz. The selected
AMtuning step will appear in the display.
Switching the warning tone
Ifthe front panel is not detached from the
headunit within five seconds of turning off the
ignition,a warning tone will sound. You can
turnoff the warning tone.
1 PressFUNCTION to select Warning.
PressFUNCTION repeatedly until Warning
appearsin the display.
2 Pressaor bto turn Warning on or off.
Pressingaor bwill turn Warning on or off
andthat status will be displayed (e.g.,
Warning: ON).
Switching the auxiliary setting
Itis possible to use auxiliary equipment with
thisunit. Activate the auxiliar y setting when
usingauxiliary equipment connectedto this
unit.
1 PressFUNCTION to select AUX.
PressFUNCTION repeatedly until AUX ap-
pearsin the display.
2 Pressaor bto turn AUX on or off.
Pressingaor bwill turn AUX on or off and
thatstatus will be displayed (e.g.,
AUX: ON).
Switching the dimmer setting
Toprevent the display from being too bright at
night,the display is automatically dimmed
whenthe car s headlights are turned on.You
canturn the dimmer on or off.
1 PressFUNCTION to select Dimmer.
PressFUNCTION repeatedly until Dimmer ap-
pearsin the display.
2 Pressaor bto turn Dimmer on or off.
Pressingaor bwill turn Dimmer on or off
andthat status will be displayed (e.g.,
Dimmer: ON).
Adjusting the brightness
Youcan adjust the display brightness. Initially
thismode is set to 12.
1 PressFUNCTION to select Brightness.
PressFUNCTION repeatedly until Brightness
appearsin the display.
Initial Settings
En
38
Section
09